Custom Sportsman and Glastar Parts



SPORTSMAN/GLASTAR STRUT to WING FAIRING  $249  
This fairing simply slides over the strut and is fastened to the wing with Rivnuts. If your strut is already installed and painted, simply cut thru the top inboard portion of the fairing and snap around the strut for easy installation. These fairings will require priming and painting and include all installation hardware.
SPORTSMAN/GLASTAR STRUT to FUSELAGE FAIRING  $369  
This 2 part fairing is designed so the wing strut can be folded by removing the aft half of the fairing. The forward half of the fairing can be bonded and faired to the fuselage prior to painting or fastened to the fuselage if it has already been painted. These fairings will require priming and painting and include installation hardware for a forward half bonded configuration. Due to the larger strut profile of the Carbon Sportsman, they will not fit the Carbon Sportsman. Indicate whether you need a GlaStar or Sportsman part when ordering.
SPORTSMAN TAIL DRAGGER/TAIL SPRING FAIRING  $69  
This flanged fairing will cover the tail spring of the tail wheel giving it a finished look. This fairing will need to be primed and painted, and includes mounting hardware.
SPORTSMAN/GLASTAR OVERHEAD CENTER CONSOLE  $275  
This unique overhead console mounts to the top deck with a blind fastening system that allows easy installation and removal. It has 2 areas for mounting switches, jacks, speakers, lights etc. It is also a great place to mount and hide a GPS antenna. Drop in aluminum panels are provided as is hardware for installing the removable panels and for mounting the entire overhead console.
GLASTAR FLAP TRACK FAIRINGS  $125  
These one part fairings mount to the wing and fair the leading edge of the flap track. These fairings will need priming and painting and include all mounting hardware. Stay tuned for Sportsman flap track fairings!
SPORTSMAN BAGGAGE FLOOR  $615  
This light weight, yet strong, 2 piece, 1/2 “thick, baggage floor can be combined with a piano hinge (customer installed) for easy opening and access underneath for storage, or left as a 2 piece floor. Easy composite closeouts can be added underneath to compartmentalize below the floor for storage and to isolate the control cables. (Not intended for use with the 3rd seat option) but can be modified to provide a close out to the foot well area with FWD or AFT facing Sportsman options.
SPORTSMAN/glastar FLAP TRACK FAIRINGS  $125  
Sportsman Flap Track fairings These one part fairings mount to the wing and fair the leading edge of the flap track. These fairings will need to be primed and painted. They also include all mounting hardware.
SPORTSMAN/GLASTAR COMPOSITE VORTEX GENERATORS  $255  
These composite Vortex generators are made with a unique high quality molding process that allows them to be made as a one piece monocoque part. They are guaranteed not to separate or break apart. There are NO secondary bonds to fail....short of driving over them with a car, they will not break or come apart. These Vortex generators will need to be primed and painted and include installation hardware.
GLASTAR/SPORTSMAN SEAT PAN INSERTS  $245  
These light weight, easy to install seat pan inserts will save untold time while doing condition inspections or maintenance. Just cut out the seat pan, just below the top edge, and drop them in place. Once installed, there is no need to remove the seat rails, seats, or seat belts to have access to the area below the set pans. Just remove a few screws, pull out the inserts, and everything is exposed with easy access. These are furnished not gelcoated, and can be primed and painted if desired. Installation hardware is included.
Fibertech Glass Panel  $650  
Finally a panel that will handle your wildest dreams... no need to settle for a flat panel when you can have a custom built, contoured fiberglass panel with style, practicality and real estate. This panel will mount an EFIS as large as a Blue Mountain EFIS One. We have created this panel to achieve maximum visibility and aesthetics while creating a platform for any EFIS combination you would like to install. In addition to the panel, you will receive custom made computer cut aluminum inserts that fit the panel sections. These pre fabricated, blank, inserts will save you countless hours of fitting and fabrication. Paper templates of the main insert are available prior to purchase for preliminary layout and sizing... just email us your request for the panel insert tracings. This instrument panel will fit the Glastar or the Sportsman.
Glareshield  $289  
This Glareshield is designed to fit the Fibertech Glass Panel. This lightweight glareshield fits nicely to the panel and fuselage while providing a stable platform that will look great painted or covered in upholstery. Included is the defroster manifold accepting 1.5" tubing. (The glareshield shown is larger than needed, and the instrument panel is not included)
SPORTSMAN Fairings Special!  $618  

Buy a set of strut-to-wing fairings and a set of strut-to-fuselage fairings and get four flap fairings free!

Glastar fairings are available also

The Strut-to-Wing fairing simply slides over the strut and is fastened to the wing with Rivnuts. If your strut is already installed and painted, simply cut thru the top inboard portion of the fairing and snap around the strut for easy installation. These fairings will require priming and painting and include all installation hardware.

The Strut-to-Fuselage fairing is a two-part set designed so the wing strut can be folded by removing the aft half of the fairing. The forward half of the fairing can be bonded and faired to the fuselage prior to painting or fastened to the fuselage if it has already been painted. These fairings will require priming and painting and include installation hardware for a forward half bonded configuration.

The Flap Track fairings are one-part fairings mount to the wing and fair the leading edge of the flap track. These fairings will need to be primed and painted. They also include all mounting hardware.

 
 
Copyright © 2005-2022 Fibertech Composites, Inc. All rights reserved.